MainInformationNetworkingServicesVirtual Private NetworksRemote AccessLogsRuleHostWeb Content FilterTraffic
ToolsPreferencesMaintenance* UPS management *AuthenticationMonitor


 ups 
 help 
     
 

 UPS status information - updates every 10 seconds:
Status:  UPS monitor daemon:  RUNNING
Time and date of listed status information:  Wed Jul 21 18:29:48 BST 2004 Model:  BACK-UPS PRO 280
Serial number:  NB9920241000 Cable type:  APC Cable 940-0095B
Load percentage:  44.2 Percent Load Capacity Battery charge:  071.0 Percent
Estimated battery run time:  24.0 Minutes Time been on battery:  0 seconds
Line supply voltage:  234.7 Volts Line supply frequency:  50.0 Hz
UPS internal temperature:  Last reason for switching to battery:  Line voltage notch or spike
Last time was on battery:  Wed Jul 21 18:22:42 BST 2004 Last time came off battery:  Wed Jul 21 18:22:54 BST 2004


 Last 8 UPS monitor events:
Wed Jul 21 18:20:42 BST 2004 apcupsd exiting, signal 15
Wed Jul 21 18:20:42 BST 2004 apcupsd shutdown succeeded
Wed Jul 21 18:21:00 BST 2004 apcupsd exiting, signal 15
Wed Jul 21 18:21:00 BST 2004 apcupsd shutdown succeeded
Wed Jul 21 18:21:49 BST 2004 apcupsd 3.10.5 (04 February 2003) SmoothWall startup succeeded
Wed Jul 21 18:22:48 BST 2004 Power failure.
Wed Jul 21 18:22:51 BST 2004 Running on UPS batteries.
Wed Jul 21 18:22:54 BST 2004 Power is back. UPS running on mains.


 Action to take when UPS on battery:
Action to take when UPS on battery:
Force shutdown (Smart mode only) when battery capacity at:


 UPS configuration:
Enable UPS monitor support: Select UPS type:
Select UPS COM port: Select UPS cable type:

 
     

   
corpserv 3.0p10 final ui-4.09a